[{"id":"networkingbeginner-001","courseId":"networking-beginner","domain":"ip-layer","topic":"Loopback address","prompt":"Under RFC 1122, a host that receives a datagram whose source address is a loopback address must not send an ICMP error message back to that source.","hint":"Consider what an error report needs from its destination address.","explain":"An error report goes back to the source of the packet that caused it. The rules check whether that source names one specific machine, and treat sources that fail the check differently.","source":"https://www.rfc-editor.org/rfc/rfc1122.html","interaction":{"type":"true-false"},"options":[{"id":"a","text":"True","why":"The page lists a loopback address among source addresses that do not define a single host, and forbids ICMP error messages for them."},{"id":"b","text":"False","whyNot":"The rule covers loopback sources too: an error reply to one is forbidden, not allowed."}],"answer":"a","explanation":"RFC 1122 forbids ICMP error messages in response to datagrams whose source address does not define a single host, and that list includes loopback addresses.","concept":"RFC 1122 forbids ICMP error messages in response to datagrams whose source address does not define a single host, and that list includes loopback addresses.","rev":1,"updatedAt":"2026-10-26","kind":"scenario","takeaways":["Error messages go only to sources that name one specific host."]},{"id":"networkingbeginner-002","courseId":"networking-beginner","domain":"ip-layer","topic":"Time to Live field","prompt":"A router forwards a packet in well under a second and has no timing data for the delay. How much must it decrease the packet's TTL field?","hint":"Consider whether a fast device is exempt from the field's counting rule.","explain":"The field is a lifetime budget counted in seconds, and every device that handles the packet takes a payment from it. Devices may be too quick to measure the delay, but the rule still sets a floor on each payment.","source":"https://www.rfc-editor.org/rfc/rfc791.html","interaction":{"type":"single"},"options":[{"id":"a","text":"Down by 1, the smallest step","why":"Even with no local timing information, the field must be decremented by 1, so fast processing still counts."},{"id":"b","text":"Down by the fraction of a second used","whyNot":"Each module must reduce the field by at least one, even when it takes less than a second."},{"id":"c","text":"Not at all, since the work took under a second","whyNot":"Any module that processes a datagram must decrease the TTL, even if the processing takes under a second."},{"id":"d","text":"Down to zero, which drops the packet at once","whyNot":"No such rule exists: the field is decreased by at least one at each processing point and is only an upper bound on lifetime."}],"answer":"a","explanation":"The sender sets TTL as a time bound in seconds, and every module that processes the datagram must decrease it by at least one, even if processing takes under a second.","concept":"The sender sets TTL as a time bound in seconds, and every module that processes the datagram must decrease it by at least one, even if processing takes under a second.","rev":1,"updatedAt":"2026-10-26","kind":"scenario","takeaways":["TTL drops at every processing point by at least one, so it bounds lifetime rather than measuring it exactly."]},{"id":"networkingbeginner-003","courseId":"networking-beginner","domain":"ip-layer","topic":"Private IPv4 address ranges","prompt":"A company runs its internal machines on its own network and never needs them reached from other companies or the internet. Under RFC 1918, which hosts count as 'private'?","hint":"The page sorts hosts into three categories; compare what each one needs.","explain":"Not every machine needs to be reachable across the whole Internet. The rules sort hosts by how far their traffic must travel, and that choice decides whether they need addresses unique worldwide.","source":"https://www.rfc-editor.org/rfc/rfc1918.html","interaction":{"type":"single"},"options":[{"id":"a","text":"Hosts that need no direct network-layer access outside the enterprise","why":"Categories one and two do not need direct access outside; category two reaches limited outside services through mediating gateways."},{"id":"b","text":"Hosts that must have globally unique addresses","whyNot":"That describes category three, which the page calls public."},{"id":"c","text":"Hosts that never use email or remote login","whyNot":"Category two hosts do use email and remote login, through gateways, and are still private."},{"id":"d","text":"Hosts that cannot be given any IP address","whyNot":"RFC 1918 covers how private hosts may be addressed; it does not bar them from having an address."}],"answer":"a","explanation":"RFC 1918 treats hosts that need no direct outside network-layer connectivity as private, and hosts needing globally unambiguous addresses as public.","concept":"RFC 1918 treats hosts that need no direct outside network-layer connectivity as private, and hosts needing globally unambiguous addresses as public.","rev":1,"updatedAt":"2026-10-26","kind":"scenario","takeaways":["Private hosts may reuse addresses across enterprises; public hosts need globally unique ones."]},{"id":"networkingbeginner-004","courseId":"networking-beginner","domain":"ip-layer","topic":"ARP address resolution","prompt":"A host on a local Ethernet segment has a packet for a neighbor. It knows the neighbor's protocol address but must address the Ethernet frame. Which mapping does ARP supply?","hint":"Think about which identifier a frame uses on the local cable, not the one a human types.","explain":"Each layer names its endpoints in its own format, while the local cable needs a hardware identifier for each frame. A protocol can distribute the matching between the two formats dynamically.","source":"https://www.rfc-editor.org/rfc/rfc826.html","interaction":{"type":"single"},"options":[{"id":"a","text":"An IP address to a 48-bit Ethernet address","why":"ARP translates a protocol address into the 48-bit Ethernet address needed to transmit the frame."},{"id":"b","text":"A domain name to an IP address","whyNot":"That is the job of the domain name system, which ARP does not provide."},{"id":"c","text":"An Ethernet address to a TCP port number","whyNot":"Ports belong to the transport layer; ARP works between protocol addresses and Ethernet addresses."},{"id":"d","text":"A subnet mask to a default gateway","whyNot":"ARP does not handle masks or gateways; it only distributes the correspondence between addresses."}],"answer":"a","explanation":"ARP dynamically distributes the mapping from a protocol address, such as an IP address, to the 48-bit Ethernet address used on the wire.","concept":"ARP dynamically distributes the mapping from a protocol address, such as an IP address, to the 48-bit Ethernet address used on the wire.","rev":1,"updatedAt":"2026-10-26","kind":"scenario","takeaways":["On a local link, frames are addressed by hardware address, so IP addresses must be translated first."]},{"id":"networkingbeginner-005","courseId":"networking-beginner","domain":"ip-layer","topic":"ICMP echo request and reply","prompt":"Put these fields of an ICMP echo message in the order they appear in the message, from the first bits to the last.","hint":"Read the layout diagram from its top row down, left to right.","explain":"A message header is a fixed grid of bits, and each field sits at a set position within it. Where a field falls in that layout, not what it means, decides its place in the message.","source":"https://www.rfc-editor.org/rfc/rfc792.html","interaction":{"type":"sort","items":[{"text":"Type","why":"The first byte, so the receiver learns the message kind before anything else."},{"text":"Code","why":"The next byte, right after Type in the first row of the diagram."},{"text":"Checksum","why":"The last 16 bits of the first row, covering the whole ICMP message."},{"text":"Identifier","why":"Starts the second row and helps match replies to requests."},{"text":"Sequence Number","why":"Follows Identifier in the second row, so it comes last of the five fields."}]},"options":[],"answer":"o:abcde","explanation":"An ICMP echo message has a fixed layout: Type, Code and Checksum share the first row, Identifier and Sequence Number the second, then the data follows.","concept":"An ICMP echo message has a fixed layout: Type, Code and Checksum share the first row, Identifier and Sequence Number the second, then the data follows.","rev":1,"updatedAt":"2026-10-26","kind":"scenario","takeaways":["Header fields sit at fixed bit offsets, so their order is part of the format."]}]