[{"id":"cisco200301-101","courseId":"cisco-200-301","domain":"network-fundamentals","topic":"WAN","prompt":"A retailer connects 40 stores to applications in its head-office data center over carrier-provided MPLS and broadband circuits. Which topology category describes the links between the stores and the data center?","hint":"Think about the distance covered and who supplies the circuits.","explain":"Network categories differ by how far their links reach and who owns the lines between locations. Compare each option's reach and ownership against the scenario's geography.","source":"https://www.cisco.com/c/en/us/solutions/enterprise-networks/sd-wan/what-is-sd-wan.html","interaction":{"type":"single"},"options":[{"id":"a","text":"LAN","whyNot":"A LAN covers a single site such as one building or store and is owned by the organization, so it does not describe geographically dispersed sites linked by carrier circuits."},{"id":"b","text":"Spine-leaf","whyNot":"Spine-leaf is a data center switching fabric inside one facility, not a way of connecting remote branches to a central site."},{"id":"c","text":"SOHO","whyNot":"A SOHO network is one small office or home network with a single multi-function router, not 40 sites connected through carrier services."},{"id":"d","text":"WAN","why":"A wide-area network links geographically separated sites, such as branches to a data center, typically over carrier circuits like MPLS or broadband."}],"answer":"d","explanation":"A WAN connects LANs at different geographic locations, often using service provider circuits such as MPLS or broadband.","concept":"A WAN connects LANs at different geographic locations, often using service provider circuits such as MPLS or broadband.","rev":1,"kind":"scenario","takeaways":["WAN = LANs far apart, linked over a provider circuit."]},{"id":"cisco200301-102","courseId":"cisco-200-301","domain":"network-fundamentals","topic":"Subnet boundaries","prompt":"What is the broadcast address of the subnet that contains host 192.168.14.77/28?","hint":"Find the block size from the mask, then locate the block that holds the host.","explain":"A mask's host bits set how many addresses each block holds. Blocks start at multiples of that size, so locate the multiple at or below the host's last octet and count to the block's far end.","source":"https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13788-3.html","interaction":{"type":"single"},"options":[{"id":"a","text":"192.168.14.79","why":"A /28 gives blocks of 16, so .77 sits in the 64-79 block and the all-ones host address, .79, is the broadcast address."},{"id":"b","text":"192.168.14.78","whyNot":"This is the last usable host address in the 192.168.14.64/28 subnet, one below the broadcast address, so it can still be assigned to a host."},{"id":"c","text":"192.168.14.64","whyNot":"This is the network address of the subnet, where all host bits are zero, and it cannot be the broadcast address."},{"id":"d","text":"192.168.14.95","whyNot":"This is the broadcast address of the next /28 block (80-95), which does not contain host .77."}],"answer":"a","explanation":"The broadcast address is the last address in the block, with every host bit set to 1.","concept":"The broadcast address is the last address in the block, with every host bit set to 1.","rev":1,"kind":"scenario","takeaways":["Broadcast address: host bits all 1s, the last address in the subnet."]},{"id":"cisco200301-103","courseId":"cisco-200-301","domain":"network-fundamentals","topic":"Host addressing","prompt":"Interface GigabitEthernet0/1 of a router is configured as shown. Which address could be assigned to a host in the same subnet?","hint":"Compute the block size for the mask and identify which addresses are reserved.","explain":"A prefix length fixes a block size, so the mask splits the last octet into equal chunks. Find the chunk holding the router's address, then check which values at its edges a host cannot take.","source":"https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13788-3.html","interaction":{"type":"single"},"options":[{"id":"a","text":"172.16.9.223","whyNot":"This is the broadcast address of the 172.16.9.192/27 subnet (the all-ones host address), so it cannot be assigned to a host."},{"id":"b","text":"172.16.9.191","whyNot":"This belongs to the previous subnet, 172.16.9.160/27, because the router subnet starts at .192."},{"id":"c","text":"172.16.9.224","whyNot":"This is the network address of the next /27 subnet, which lies outside the router interface subnet."},{"id":"d","text":"172.16.9.210","why":"The /27 mask makes blocks of 32, so the subnet is 172.16.9.192-223 and .210 lies between the network and broadcast addresses."}],"answer":"d","explanation":"Apply the mask to find the subnet range; the first address is the network and the last is the broadcast.","concept":"Apply the mask to find the subnet range; the first address is the network and the last is the broadcast.","rev":1,"kind":"scenario","code":"R1# show ip interface Gi0/1 | inc Internet\n  Internet address is 172.16.9.200/27","takeaways":["Mask it to get the range: first is network, last is broadcast, hosts in between."]},{"id":"cisco200301-104","courseId":"cisco-200-301","domain":"network-fundamentals","topic":"SOHO network","prompt":"A five-person accounting practice works from a home office. One ISP-supplied box provides routing, a four-port switch, Wi-Fi and a basic firewall. Which network type does this describe?","hint":"Consider the size of the site and the fact that one device does several jobs.","explain":"Designs scale from a few devices in one room up to campuses. Match each option's scale against the users and sites described.","source":"https://www.cisco.com/site/us/en/solutions/small-business/networking/routers/index.html","interaction":{"type":"single"},"options":[{"id":"a","text":"Three-tier campus","whyNot":"A three-tier campus uses separate access, distribution and core layers for large multi-building sites, far more than a five-person office needs."},{"id":"b","text":"Spine-leaf fabric","whyNot":"A spine-leaf fabric interconnects many data center switches, and it is not built around a single all-in-one device at a small office."},{"id":"c","text":"WAN","whyNot":"A WAN links separate sites over carrier services, whereas this scenario describes a single location with one local network."},{"id":"d","text":"SOHO network","why":"A small office/home office network typically relies on a single multi-function device that combines routing, switching, wireless and firewall roles."}],"answer":"d","explanation":"SOHO networks serve a handful of users from one location and usually consolidate router, switch, AP and firewall functions in one device.","concept":"SOHO networks serve a handful of users from one location and usually consolidate router, switch, AP and firewall functions in one device.","rev":1,"kind":"scenario","takeaways":["SOHO: a few users, one box acting as router, switch, AP and firewall."]},{"id":"cisco200301-105","courseId":"cisco-200-301","domain":"network-fundamentals","topic":"Valid host addresses","prompt":"Which TWO addresses can be assigned to hosts in the subnet 192.168.50.64/26? (Choose TWO.)","hint":"Determine the first and last address of the /26 block, then exclude the reserved ones.","explain":"A prefix length sets the size of a contiguous address run. Map where the run starts and ends, then test each candidate against its edges.","source":"https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13788-3.html","interaction":{"type":"multiple","tellCount":true},"options":[{"id":"a","text":"192.168.50.100","why":"A /26 gives blocks of 64, so the subnet spans .64-.127 and .100 lies strictly between the network and broadcast addresses."},{"id":"b","text":"192.168.50.64","whyNot":"This is the network address of the subnet (all host bits zero), which identifies the subnet and cannot be given to a host."},{"id":"c","text":"192.168.50.127","whyNot":"This is the broadcast address of the subnet (all host bits one), which is reserved for traffic to all hosts in the subnet."},{"id":"d","text":"192.168.50.126","why":"This is the last usable address in the .64-.127 block, one below the broadcast address, so it is valid for a host."}],"answer":"ad","explanation":"Usable host addresses lie between the network address and the broadcast address of the subnet.","concept":"Usable host addresses lie between the network address and the broadcast address of the subnet.","rev":1,"kind":"scenario","takeaways":["Hosts live strictly between the network and broadcast addresses."]}]